Raven Concealment Moduloader System

Raven Concealment

$32.50 $22.00

ModuLoader Frames are designed to bridge the gap between daily concealed carry gear and more “tactical” load carriage products like the extremely versatile Taco pouches from High Speed Gear, Inc. ModuLoader Frames are injection molded from the same unbreakable polymer as our belt loops and pancake wings, and allow the user to mount Taco pouches securely to a standard pants belt. This simple product largely eliminates the need for unnecessarily bulky padded MOLLE/PALS belts.

Frames are made to work specifically with HSGI Taco pouches. Taco pouches have a number of features that work with the Frames to hold the pouch in place. All Taco pouches have three horizontal rows of 1" webbing with no space in between the rows. The Taco pouches for rifle magazines are tacked down the center of these three rows to create two separate channels. On the Taco pouches, by selecting which two rows of webbing you pass the Frame through you can adjust the ride height up or down.

Frames come in four sizes. The pouch configuration you want will determine which size you select. Each size has a different number of vertical "fingers" (5, 4, 3 or 2). The fingers slide behind two of the horizontal rows of webbing on the inside face of the pouch and are secured by installing the included bracket along the bottom of the Frame. Taco rifle mag pouches use two fingers, pistol mag pouches use one finger. If you will be mounting more than one pouch on a Frame you must skip a finger between each pouch. For example, if you want to mount two rifle mag carriers on a Frame, you would order a 5 finger Frame. The two rifle mag carriers would mount on the four outer fingers leaving an empty finger in the middle of the Frame assembly. If you want to assemble a frame for one rifle and one pistol mag carrier, you would select a 4 finger frame. If you want to assemble a Frame for two pistol mag carriers, you would select the 3 finger Frame. If you want to assemble a Frame for one rifle mag carrier, you would select a two finger Frame.

This is our Modular Base Frame set up. These kits come with the size frame you select, locking bracket, all needed hardware and the belt attachment you choose. If you choose standard belt loops, 5 finger Frames come with three belt loops, all other sizes come with two belt loops. If you select 1.5 or 1.25" the belt loops can be mounted with the logo pointing up or down to adjust the ride height. If you select pancake wings all Frames come with two wings in the belt size you select. If you select the paddle clip option 5 and 4 finger Frames come with two clips, 3 and 2 finger frames come with one clip. You can link these frames to our other modular holsters and carriers (with additional hardware kits).

Fit Guide:

Rifle magazine pouches mount on "two fingers." Pistol magazine pouches mount on "one finger," but require extra space for the belt loops to be mounted. When mounting more than one pouch, it is necessary for one "finger" to be a spacer between the pouches. Examples:


  • One rifle magazine - Two Finger Frame
  • One pistol magazine - Three Finger Frame recommended (belt loops mounted to outside Fingers, pistol pouch mounted to center Finger).
  • One Rifle magazine and one pistol magazine - Four Finger Frame
  • Two rifle magazines - Five Finger Frame
  • Two pistol magazines - Three Finger Frame
  • Three pistol magazines - Five Finger Frame

With the standard belt loops included for 1.5" belts, the magazines will ride on the belt with four available ride heights. Because of the construction of the loops and the nature of the carriers, they will stand off away from your belt just a little. This will facilitate a positive grip on the magazines and will also clear most concealable body armor. If you require a more concealable set up, you can choose a set of our Pancake Wings which will pull the pouches in as close as possible to your body. If you require a quick on/off option, you can select the paddle clip option. The paddle clip is adjustable from 1.25" to 2" belts.

Like all RCS products, the ModuLoader Frames are proudly designed and manufactured in the U.S.A., and are covered by our unconditional lifetime warranty.

More from this collection